Pioneer DJM-400 Manuel d'utilisateur télécharger pdf (Page 5)

CONNECTIONS

CONNECTING INPUTS

Pioneer DJ CD players

Connect a DJ CD player’s audio output connectors to one of the

channel 1 to 2 CD input connectors, and connect the player’s control

cable to the corresponding channel’s CONTROL connector.

Set the connected channel’s input selector switch to [CD].

Analog turntable

To connect an analog turntable, connect the turntable’s audio output

cable to one of the channel 1 to 2 PHONO/LINE input connectors. Set

the corresponding channel’s PHONO/LINE switch to [PHONO], and

set the channel’s input selector switch to [PHONO/LINE]. The DJM-

400’s PHONO inputs support MM cartridges. Connect the turntable’s

ground wire to the DJM-400’s SIGNAL GND terminal.

Connecting other devices with line level output

To use a cassette deck or other CD player, connect the component’s

audio output connectors to one of the channel 1 to 2 PHONO/LINE

input connectors. Then set the corresponding channel’s PHONO/

LINE switch to [LINE], and the input selector switch to [PHONO/LINE].

Microphone

The MIC1 and MIC2 jacks can be used to connect microphones with

Ø6.3 mm phone plugs. Set MIC/AUX switch to [MIC] position.

Auxiliary input connectors

The MIC1 and MIC2 jacks can also be used together as a pair of stereo

line input connectors to connect a component equipped with line

level output connectors. Connect the component’s L channel to MIC1

(AUX(L)) jack and the R channel to the MIC2 (AUX(R)) jack. Then set

the MIC/AUX switch to [AUX] (this connection requires the use of

Ø6.3 mm phone plugs).

CONNECTING OUTPUTS

Master output

This unit is furnished with MASTER OUT 1 and MASTER OUT 2

output systems, both of which support the use of RCA plugs.

If the unit’s STEREO/MONO switch is set to [MONO], the master

output will be a monaural combination of L+R channels.

Always turn off the power switch and disconnect the power plug from its outlet when making or changing connections.

POWER

OFF

AC IN

MASTER

OUT

MONO STEREO

LINE PHONO

LINE

PHONO

MIC2 MIC1

AUX(R) AUX(L)

AUXMIC

CONTROL

LINE PHONO

LINE

PHONO

CONTROL

SIGNAL

GND

L R

LRLRLRLR

MIC/AUX switch

Input selector switches

Microphone 2

Microphone 1

PHONO/LINE switch

Note:

Set switch to [LINE]

except when using

an analog turntable

Electronic instrument,

CD player, etc. (phone

plug connection)

Cassette deck, etc. Analog turntable Analog turntable DJ CD player DJ CD player

Headphones

The front panel PHONES jack can be used to connect headphones

with a Ø6.3 mm stereo phone plug.

POWER

OFF

AC IN

MASTER

OUT

MONO STEREO

L R

STEREO/MONO switch

Front panel

Power amplifier

Cassette deck, etc.

(analog input recording

component)

Power amplfier Headphones

CONNECTING THE POWER CORD

Connect the power cord last.

÷ After completing all other connections, connect the accessory

power cord to the AC inlet on the back of the player, then connect

the plug to a standard wall outlet or to the auxiliary power outlet

of your amplifier.

÷ Use only the supplied power cord.

1 2 3 4 5 6 7 8 9 10 ... 15 16

Commentaires sur ces manuels

Pas de commentaire

Pioneer DJM-400 Manuel d'utilisateur Page 5

Commentaires sur ces manuels

Produits connexes et manuels pour Instruments de musique Pioneer DJM-400