Pioneer N-50-K Manuel d'utilisateur

Operating InstructionsN-50-K/-SA-70-K/-SDriver softwareNetwork Audio PlayerIntegrated Amplifier

103 Under the [Advanced] tab, select for [Default Format] the desired output sampling rate, then click on [Apply].Procedure finished.

11Troubleshooting (Windows 7)When using Windows XP, see page 5; for Windows Vista, see page 7; for Mac OS X, see page 15.1. No soundDo not boot your c

126 Under the [Playback] tab, conrm that for [Speakers], [Pioneer USB Audio Device] is checked as the [Default Device]. If another device has been

132. To disable the operating system’s sound schemeUnder default OS settings, computer events may be accompanied by audio signals and beeps that are a

143 Under the [Advanced] tab, select for [Default Format] the desired output sampling rate, then click on [Apply].Procedure finished.

15Troubleshooting (Mac OS X)When using Windows XP, see page 5; for Windows Vista, see page 7; for Windows 7, see page 11.1. No soundDo not boot your c

163. To set the sampling frequency for audio data output from your computerBy synchronizing the sampling frequency of playback files with the transmis

<ARB7465-B>© 2012 PIONEER CORPORATION.All rights reserved.PIONEER CORPORATION1-1, Shin-ogura, Saiwai-ku, Kawasaki-shi, Kanagawa 212-0031, JapanP

2About these Operating InstructionsWhen a USB cable is used to connect the unit’s DIGITAL IN USB port to a computer, audio files located on the comput

33 Use a proper USB cable to connect a computer to a device equipped with DIGITAL IN USB connector, then turn on the power.For more information regar

4Procedure finished.Procedure finished.7 Click on [Finish].The driver installation is completed.8 Reboot your computer to nalize installation of th

5Troubleshooting (Windows XP)When using Windows Vista, see page 7 ; for Windows 7, see page 11 ; for Mac OS X, see page 15.1. No soundDo not boot your

67 Click on the [Audio] tab, then conrm that [Pioneer USB Audio Device] is listed as the [Default device] for [Sound playback]. If another device h

7Troubleshooting (Windows Vista)When using Windows XP, see page 5; for Windows 7, see page 11; for Mac OS X, see page 15.1. No soundDo not boot your c

85 Click on [Start]  [Control Panel]  [Hardware and Sound]  [Sound].6 Under the [Playback] tab, conrm that for [Speakers], [Pioneer USB Audio De

92. To disable the operating system’s sound schemeUnder default OS settings, computer events may be accompanied by audio signals and beeps that are au