Pioneer BDP-LX91 Manuel d'utilisateur télécharger pdf

Notice on the Addition of Functions to the

BDP-LX91

In addition to the functions described in the operating instructions, there are a number of other functions that have been added to the

BDP-LX91. These new functions are described in this notice. Also refer to the included operating instructions.

The additional functions are as follows:

•DTS-HD audio output

• Crossover frequency

•BD-LIVE

DTS-HD audio output

Output of the DTS Digital Surround and DTS-HD (DTS-HD High Resolution Audio and DTS-HD Master Audio) signals recorded on BD-ROMs

has changed.

• Before the function was added, the DTS Digital Surround signals included within the DTS-HD signals were converted to linear PCM or

analog audio signals for output. With the addition of the function, the DTS-HD signals are converted into linear PCM or analog audio

signals for output.

• When using with a 7.1-channel speaker system, a maximum of 7.1 channels of DTS Digital Surround signals are output.

For details, refer to the table below.

Changes are indicated in bold.

Caution

• The output from all terminals other than the ones selected for Audio does not sound as intended by the content provider.

Manufactured under license under U.S. Patent #’s: 5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,226,616; 6,487,535; 7,392,195; 7,272,567;

7,333,929; 7,212,872 & other U.S. and worldwide patents issued & pending. DTS is a registered trademark and the DTS logos, Symbol, DTS-HD

and DTS-HD Master Audio | Essential are trademarks of DTS, Inc.

Audio format

AUDIO OUT (7.1 ch) terminals DIGITAL OUT terminals HDMI OUT (MAIN) terminal

2ch

1. When Audio Output Mode is set to 2 Channel or Multi-channel.

Multi-channel

Converted to

linear PCM audio

2. When DTS Out is set to DTS  PCM.

Not converted to

linear PCM audio

3. When DTS Out is set to DTS 1/DTS 2.

PCM

4. When HDMI Audio Out is set to PCM or Auto.

Auto

BD-ROM DTS Digital

Surround

Converted to 2-

channel audio

7.1-channel audio

Converted to 2-

channel audio

DTS Digital

Surround

5. When DTS Out is set to DTS 2, the secondary audio and interactive audio signals are not mixed in when outputting the DTS Digital Surround signals as a bitstream.

7.1-channel audio

DTS Digital

Surround

6,8

6. The secondary audio and interactive audio signals are not mixed in when outputting the DTS-HD Master Audio, DTS-HD High Resolution Audio or DTS Digital Surround

signals as a bitstream.

DTS-HD High

Resolution Audio

7.1-channel

audio

7. When the output video resolution is set to 576i/480i or 576p/480p (480i or 480p for U.S. and Canadian models), the signals may be output in linear PCM (2 channels),

depending on the HDMI High Speed Transmission setting and/or the connected HDMI device(s).

DTS-HD High

Resolution

Audio

6,7,8

8. If the connected HDMI device is not compatible with DTS-HD Master Audio or DTS-HD High Resolution Audio, the signals are output in linear PCM (7.1 channels) or

DTS Digital Surround bitstream.

If the connected HDMI device is not compatible with DTS Digital Surround bitstream, the signals are output in linear PCM (2 channels).

DTS-HD Master

Audio

DTS-HD Master

Audio

6,8,9

9. When the output video resolution is set to 576i/480i or 576p/480p (480i or 480p for U.S. and Canadian models), the signals may be output as linear PCM 2-channel or

DTS Digital Surround bitstream signals, depending on the HDMI High Speed Transmission setting and/or the connected HDMI device(s).

VRY1217-A

1 2 3 4

Résumé du contenu

Page 1 - BDP-LX91

02Notice on the Addition of Functions to the BDP-LX91In addition to the functions described in the operating instructions, there are a number of other

Page 2 - Crossover frequency

Crossover frequencyThe crossover frequency can be set at the speaker settings.The crossover frequency setting is the frequency (Hz) below which the ba

Page 3 - Troubleshooting

02There are three types of erase menus, as described below.• Individual/Shared Data EraseUse this procedure to select and erase data downloaded with t

Page 4 - MAIN(KURO LINK)

Others (frequently asked questions)About the connections diagram at "Achieving better sound quality" under "Connecting up" - "