Pioneer VSW-1 Manuel d'utilisateur Page 3

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 44
  • Table des matières
  • DEPANNAGE
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 2
3
<DRB1375> En
English
Features
1. Quick response
Using the latest circuit technology, this unit
suppresses noises and color distortion even
during sudden switchovers.
2. Automatic switching
Can be combined with a Pioneer DJ mixer for
video switching linked to the fader start mode.
3. Full complement of input/output
connectors
Supports component video, S-Video, and
composite video IN/OUT signals.
(Signals are only input and output; no conversion function
is provided.)
Handling Precautions
Installation location
Do not install above an amplifier or other heat-emitting com-
ponent, or use for long periods near spotlights or other head-
emitting appliances, since the unit may suffer adverse effects.
Install away from tuners and television sets. When placed
near such components, noise and video distortion may occur;
such effects are particularly subject to occurrence when an
internal antenna is used; in such cases, either use an external
antenna, or turn off this unit’s power.
The screws on the right and left sides of this unit can be used
to mount the unit in a rack installation or stand. For details,
consult your dealer.
Note:
When installing the unit in a rack or stand, always use the screw
holes provided on the right and left sides of the unit.
Specifications
1. General
Power ............................ AC 110-120 V/AC 220-240 V, 50/60 Hz
Power consumption ............................................................ 9 W
Operating temperature....................................... +5°C to +35°C
Storage temperature ......................................... –40°C to +60°C
Operating humidity.............. 5-85 % R.H. (without precipitation)
Weight.............................................................................. 1.4 kg
External dimensions ................. 250 (W) x 88 (D) x 87.5 (H) mm
(not including connectors, buttons and other protruding parts)
2. Video input section (input level/impedance)
Component video ................... BNC connectors x 3 (2 systems)
Y ...................................................................... 1 Vp-p / 75
C
B/PB ............................................................. 0.7 Vp-p / 75
C
R/PR ............................................................. 0.7 Vp-p / 75
S-Video ................................................ S connector (2 systems)
Y ...................................................................... 1 Vp-p / 75
C ............................................................... 0.286 Vp-p / 75
Composite video ............................ RCA connector (2 systems)
1 Vp-p / 75
3. Video output section (output level/impedance)
Component video ..................... BNC connectors x 3 (1 system)
Y ...................................................................... 1 Vp-p / 75
CB/PB ............................................................. 0.7 Vp-p / 75
C
R/PR ............................................................. 0.7 Vp-p / 75
S-Video .................................................. S connector (1 system)
Y ...................................................................... 1 Vp-p / 75
C ............................................................... 0.286 Vp-p / 75
Composite video .............................. RCA connector (1 system)
1 Vp-p / 75
4. Sync signal output section
Sync output .................................... BNC connector (2 systems)
1 Vp-p / 75
Supported video modulation systems....................... NTSC/PAL
5. Other connectors
Control input................................... minijack (3.5 dia) 2 systems
Control output ................................ minijack (3.5 dia) 2 systems
6. Accessories
BNC cables .......................................................................... 2
Control cables ...................................................................... 2
Operating Instructions ......................................................... 1
For improvement purposes, specifications and design may be
subject to modification without notice.
Cleaning the Unit
÷ Use a polishing cloth to wipe off dust and dirt.
÷ When the surfaces are very dirty, wipe with a soft cloth dipped
in some neutral cleanser diluted five or six times with water
and wrung out well, then wipe again with a dry cloth. Do not
use furniture wax or cleaners.
÷ Never use thinners, benzene, insecticide sprays or other
chemicals on or near this unit, since these will corrode the
surfaces.
Features/Specifications
Vue de la page 2
1 2 3 4 5 6 7 8 ... 43 44

Commentaires sur ces manuels

Pas de commentaire